Model NCVL

Model: NCT
Standard: ISO 5199

Model NCVL is a single-stage in-line volute casing pump with opposed suction and discharge ports.

The axial thrust compensation takes place through relief bores, wear rings are standard on the intake and delivery side.

The bearing of the pump shaft takes place in a cylindrical roller bearing and an angular contact ball bearing pair.

Due to the bearing carrier design, these pumps can be used for higher temperatures.

Feature

• Q max: 300 m³/h [1320 g.p.m.]**
  
• H max: 200 m [656 ft]**
  
• operating pressure: 16 bar [232 psi]*
  
• temperature: 350° C [660° F]*
  
• max rotational speed: 3500 min−1
  
• gasket/mechanical seal: mechanical seal
  
• installation: vertical
  
• self-priming: no
  
• bearing: rolling bearing
  
• lubrication: grease
  
• materials: duplex, Ni-based, spheroidal graphite iron / cast steel, austenitic steel
  
• standards: ISO 5199
  
• explosion protection: category 2 / zone 1